Choosing a duct cleaning equipment supplier

Who supplies air ducts, and who supplies the cleaning equipment?

On Google you often see the question of who supplies air ducts. That covers two different worlds, and they are easily confused.

• Suppliers of air ducts themselves supply spiral duct, rectangular ducts, bends, fittings and fixing materials. Their customers are installers who fit ducts in new builds or during renovation.
• Suppliers of duct cleaning equipment supply the machines, shafts, brushes, sealing products, extraction units and cameras you use to clean existing ducts. Their customers are cleaning contractors, installers with a maintenance department and facilities teams.

Looking for products to install? Then you need the first group. Looking for a machine to clean ducts at your clients' premises? Then you need the second. Lamers belongs to that second group: Lamers supplies cleaning equipment, not ducts for installation, and does not clean ducts as a service itself.

Checklist: choosing a duct cleaning machine supplier

Run every supplier past this list. If one of the points is missing, ask further before you order.

A simple way to use the table: give each criterion a score from one to three for every supplier you talk to. The total is not the decision, but the gaps show you exactly which questions to ask in your next phone call.

Range: does the supplier cover your duct cleaners and sizes?

The range is the first filter. A cleaning contractor serving offices, schools and care clients often works in round and rectangular ducts of 100 to 600 mm with long runs. An installer in housing deals with smaller ducts and shorter sections. A specialist in small or awkward ducts looks for something from 30 mm.

At Lamers this sits in the product category for air duct cleaning, with machines, extraction and filtration, accessories, sealing caps and a built-in air purifier. The Danduct Clean machines cover different situations:

• DC4 duct cleaner: electric, up to 30 metres reach, ducts from 100 to 600 mm, round and rectangular, through vertical ducts and 90 degree bends.
• PD2 duct cleaner: part of the range; request the specifications from Lamers.
• The Intelligent Airnozzle: compressed air with a built-in camera and LED lighting, from 30 mm, self-propelled by air pressure.

Want to see all machines side by side? The overview helps you air duct cleaning tools.

Brands: Danduct Clean and LIFA AIR as duct cleaner suppliers

In duct cleaning, specialist manufacturers count. Two names you come across at Lamers:

In its own words, Lamers Reinigingstechniek supplies a complete programme for the professional duct cleaner. A supplier with more than one specialist brand can help you compare better, for example for wide main ducts above 600 mm, where LIFA AIR goes up to 1,200 mm with the CombiCleaner 40.

Parts and brushes: can you reorder later?

You buy a machine once, but you buy brushes more often. They wear, get dirty, and you come across duct sizes you did not have yet. So always ask whether the supplier provides separate parts. Danduct Clean offers shaft brushes in soft, normal and Tynex, from 100 to 600 mm, and soft shafts for small ducts with bends.

You also need accessories to do the job properly: duct sealing and extraction to close off duct sections and valves, access doors for places without an opening, and an extraction unit that keeps the duct under negative pressure. If you want to understand the difference between brush stiffnesses, see the explanation on duct cleaning brushes.

A practical habit for contractors: keep a short list of the brush sizes you used on each job. After a few months you know which diameters wear fastest, and you can reorder those before they run out on site.

Advice and reachability: what to expect from a duct cleaning equipment distributor

A good supplier first asks about your work and only then about your budget. Which ducts do you come across, how long are your runs, do you also clean kitchen extraction, do you want to report with images? Based on that you get a proposal that fits.

The Lamers product pages show three buttons: request a quote, call me back and ask a question. You can reach Lamers on +31 (0)314 623 341 or info@lamersequipment.nl, and for short questions via WhatsApp on 06-38048347. Want to talk through your first kit with someone? Duct cleaner quotation and explain which ducts you clean for your clients.

What an equipment supplier does not need to do: explain the law to you. Still, it helps to know why your clients clean. In the Netherlands there is no legal cleaning frequency; however, under article 6.2 of the Working Conditions Decree (Arbobesluit), installations must always be in good working order. You can find more on Dutch rules on ventilation maintenance.

Lamers: family business in Zelhem with more than 50 years of experience

Lamers Reinigingstechniek B.V. is located at Ambachtsweg 2 in Zelhem. It is Lamers cleaning equipment, which has supplied a broad range of professional cleaning equipment for industrial cleaning and maintenance for more than 50 years, with standard solutions and customised machines, and which works internationally.

Besides duct cleaning, Lamers offers industrial vacuums, air purification, oil mist and chip extractors and equipment for emergencies, among other things. For a cleaning contractor that is convenient: extraction and filtration come from the same source as the brushing machine.

What Lamers does not do: clean ducts as a service or lend out equipment temporarily. Lamers sells equipment only. In doubt about this? First read whether it makes sense for you to hire or buy a duct cleaner. Once you have decided, the selection guide on buying a duct cleaning kit helps you tackle it step by step.